Product Description

Katool KT-310 Auto Body Frame Machine – Professional Collision Repair Bench

The Katool KT-310 is a hydraulic auto body frame straightening machine designed for professional collision repair shops working on vehicles up to 7,000 lbs. CE-certified with a robust Q235/Q245 steel construction, the KT-310 delivers 60 kN (approximately 13,488 lbf) of pulling force through a 360-degree rotating pulling tower — giving technicians the ability to correct frame damage from any angle without repositioning the vehicle.

Featuring a low 4.3-inch drive-on height and a 9-position hydraulic height-locking system, the KT-310 fits standard shop bays and accommodates a wide range of vehicle sizes, from compact sedans to light trucks.

Key Features

  • 360-Degree Rotating Pulling Tower: 60 kN pulling force with full rotation and secure locking at any angle — pull directly from the damage point without repositioning
  • Low 4.3" Drive-On Height: Damaged vehicles load straight on without steep ramps; platform rises to 67" on dual hydraulic cylinders
  • 9-Position Height Locking System: Adjustable from 4.3 to 67 inches for comfortable working height
  • Quick-Fix Clamp System: Two-screw clamps instead of traditional four-bolt systems — faster vehicle setup; adjusts to grip frame rails 3–8" wide
  • Four Rotating Lifting Arms: 180-degree rotating arms accommodate wheelbases from 90 to 120 inches, lock at 15-degree intervals
  • Compact 34.5-Inch Width: Fits a standard 12-foot bay with room to work on all sides
  • CE Certified: Q235/Q245 steel frame with 100mm x 50mm rectangular tubing (5mm wall thickness)

KT-310 Specifications

Frame Length 130.8 Inches
Frame Width 34.5 Inches
Frame Height Range 4.3 to 67 Inches
Max Pulling Force 60 kN (~13,488 lbf / 6 Tons)
Max Vehicle Weight 7,000 lbs
Rated Voltage 220V Single or Three-Phase
Construction Q235/Q245 Steel, CE Certified
Wheelbase Range 90–130 Inches

Applications

  • Front-end collision repair on sedans and compact SUVs
  • Quarter panel and rear frame straightening
  • Rocker panel and floor pan alignment after side impacts
  • Suspension mounting point correction using 360-degree pulling
  • Light truck frame rail straightening (under 7,000 lb gross weight)

Manufacturer Warranty

All Katool products purchased through Site and Supply carry a 12-month manufacturer's warranty covering defects in materials and workmanship under normal use.

  • Covered: Manufacturing defects, faulty components, and mechanical failures under normal operating conditions.
  • Not Covered: Damage from improper use, lack of maintenance, unauthorized modifications, physical accidents, or normal wear and tear.
  • To Claim: Contact Site and Supply at support@siteandsupply.com or +1 (567) 361-3447. We coordinate with the manufacturer on your behalf.

Note: The KT-310 frame machine also includes an extended 3-year structural warranty on the frame, towers, and lifting arms.

Site and Supply is an authorized Katool dealer — your warranty is fully valid and manufacturer-backed.